By Gregg Wartgow, contributing writer for the Association of Equipment Manufacturers (AEM)

The vision is there.

Wouldn’t it be great if the entire job-site – the general contractor, subs, designers, owners, equipment vendors, and material suppliers – were all working in sync with the data that shifts with each condition change, progress report, change order, telematics warning, and machine inspection? That the right people got the right information at the right time to make informed decisions?

This one-dashboard vision is much, much easier said than done. The journey of one equipment manager illuminates the roadblocks.

Several years back, Langdon Mitchell, Equipment Division General Manager for heavy civil contractor Morgan Corp., needed to have someone physically go machine-by-machine to update the software in his fleet.

The next big hurdle: each OEM had its own proprietary telematics portal. Like most contractors, Morgan has a mixed fleet, and getting a unified fleet view from all the disparate systems was clunky and time-consuming, Mitchell said.

The Spartanburg, South Carolina, company is now using a third-party product that amalgamates the information from each brand in the company fleet in addition to its rental equipment. “It’s become a single source of truth,” Mitchell said. “Beyond the raw telematics data, it’s allowing us to have tools to have actionable items.”

But more is needed, said Will Hipp, Equipment Data Analyst with Morgan. “Our eventual goal is to have all the project managers on board so they can see the machines on other job-sites and identify any machines with little utilization.”

That involves getting dynamic project schedules to match up with fleet needs so areas can be pinpointed where the company perhaps has too many or not enough machines. “That is one of the biggest tasks we have: making sure that machines are in the right place at the right time,” Mitchell said.

JOBSITE CONNECTIVITY IS COMPLEX

This is one example of the information needs of one division of one company. Multiply those needs company-wide and then by all the entities with which that one company does business.

Now add the industry at large, and you get the idea of the complexities involved.

“It sounds pretty simple, but when you look at the disparate systems GCs, subs, developers, and agencies use, everybody has different formats and protocols, so it’s extremely convoluted,” said Brian Juroff, Senior Vice President of Sales – positioning solutions at Topcon Positioning Group. “While job-site connectivity is easy to define, executing it is a completely different matter. Every contractor has a different soup mix of software for the office, modeling, scanning, etc. It becomes a huge hurdle.”

“There’s an immense amount of data that is created throughout the course of a construction project,” said Patrick Stevenson, Vice President of Product Management and Platform at Trimble. “Jobsite connectivity is making sure that information is transferring to the right individuals at the right moment in time so that they can more effectively do their job.”

What’s needed is a connective tissue that integrates fully with all pieces of information, creating a living, adaptive body of data.

“It’s providing a digital overview of what’s happening on the site so everyone can easily make decisions,” said Kenneth Veys, Portfolio Manager, Uptime, and Connectivity at Volvo Construction Equipment.

TECHNOLOGY HAS GIVEN JOBSITE CONNECTIVITY A BOOST

Overall, technology infrastructure advancements like 5G networks, LiDAR scanning, GNSS, and edge computing are laying the foundation for job-site connectivity.

“I’ve been on job-sites in the past where at 2:30 pm in the afternoon, you were going to lose connectivity based on satellite positioning,” said Lonnie Fritz, Senior Market Professional at Caterpillar. “You could set your watch to it. GNSS alone has really driven improvement in accuracy and reliability.”

One of the biggest shifts is open architecture software so data from different sources can be more easily integrated. “That’s allowing a lot of contractors to embrace the concept of automating their processes,” Juroff said.

While jobs in more remote areas still face connectivity issues, the amount of data that can now be transmitted has grown exponentially in the world-at-large.

And there’s a wealth of data waiting to be mined in a connected way, from machine telematics to design data to labor apps, said Jason Anetsberger, Komatsu’s Director of Customer Solutions. Connected machines can now receive updated design data and report back their productivity, and the shape of the terrain as they create it.

Severino Trucking of Candia, New Hampshire, went to a cloud-based model to reduce redundancy and disconnect, said Pat L’Heureux, Project Manager. “We have some crews that will take a project 80% of the way, and then another group takes over. Everyone needs to have the same information.”

Going to the cloud has been a “huge time-saver,” reported L’Heureux. “I can now troubleshoot an issue in five minutes, where sometimes in the past it could take me three hours because of travel time.”

And it’s not just machines and production schedules that are part of the data mix. Trackers, specialized hardhats, and smart glasses are adding location, fall alerts, and biometrics information on construction workers, leading to increased safety and labor management capabilities.

CONTRACTOR TECHNOLOGY ATTITUDES HAVE CHANGED

Contractor attitudes have also shifted, said Trimble’s McLachlan. “We’ve seen a big jump in adoption of connectivity solutions,” she said, “especially now that we can push a design update out to a machine remotely instead of driving out to the job-site.”

“Every year, the needle is definitely moving on the contractor technology adoption levels,” Fritz said. “There’s an increase in their belief of what technology can do to improve their operations.”

The combination of grade control data with telematics reporting was a significant step forward, said James Leibold, Product Manager – Connectivity at John Deere. “You’re not just having machines that report data, but you can remotely go into a machine and fix it.”

The ability to not physically have to download job model revisions is critical, said Lyle Ballou, GPS Manager for DXI Construction in Churchville, Maryland. “We are managing 65 active jobs as we speak, and we have to manage the GPS info as different crews move in and out of different jobs weekly, sometimes daily.”

DXI Construction juggles the workload for 51 different crews in three different states, which necessitates being able to instantly connect and “program” each crew for the work to be performed.

“The investment we have made has eliminated not being able to work because we have to wait for stakeout or wait for a program to be driven to a job and downloaded,” Ballou added.

WHAT’S THE RIGHT SOLUTION?

One barrier to job site connectivity is the sheer choice of tech options out there, said Jim Bretz, Connectivity Services Support Manager at Volvo Construction Equipment. “Customers don’t know what to choose,” he said. Fears about office and field data security are also valid.

“It’s so fragmented right now there with the number of solutions,” agreed Mitchell. “One company has a cool answer for one thing, and another company has a cool answer for another thing. How do you now bring that information into the whole so you can make decisions?”

“The different solutions can be siloed, which makes it hard to have cross-compatibility,” added L’Heureux. “If providers get too proprietary, it can hurt the end user.”

CONSTRUCTION HAS TECHNOLOGY’S ATTENTION

“I love the attention that the industry is now getting,” said Anetsberger. “People are seeing that it’s either ripe for digital disruption or that there must be an easier way.”

Mitchell agreed: “What is exciting in our industry right now is how technology is really, really ramping up.”

Contractors will be able to piggyback on what’s happening in the broader technology space. In addition to job-site connectivity, these efforts will also lay the groundwork for autonomous machines.

But don’t think job site connectivity will solve all problems, Bretz warned. “It will likely reveal more issues and create a whole new aspect of managing job-sites and machines because it opens up a lot of information that wasn’t immediately available,” he said.

“The connected job-site concept is something I’m passionate about, and I want to see it grow,” said L’Heureux. “It will help with the disconnect we see daily between companies, engineers, and even internally. It will create more of the community if we can share this data.”

About the Association of Equipment Manufacturers (AEM)
AEM is the North America-based international trade group representing off-road equipment manufacturers and suppliers with more than 1,000 companies and more than 200 product lines in the agriculture and construction-related industry sectors worldwide. The equipment manufacturing industry in the United States supports 2.8 million jobs and contributes roughly $288 billion to the economy every year.